When the robot and the mobile APP are not connected to the same WiFi , click to enter the remote control APP and prompt "Before entering the remote control, please keep the mobile phone and the device under the same WiFi "; for safety reasons, the robot and the mobile APP need to be connected to the same WiFi Only...
Open the APP and enter the device home page, click the upper right corner menu bar to set the Y word cleaning (factory default bow word cleaning ); Y-shape cleaning: Start cleaning with a Y-shape, and the path is a Y-shape, which can clean more efficiently. Under the same conditions, the time required is about 1.2 times that of the...
If you want to perform the factory reset function, click "Restore Factory Settings" and "OK" on the APP side. At this time, the device will be reset and restarted, and the device has been restored to the factory state. Note that it cannot be restored after a factory reset. In addition, long pressing the robot power button + recharge button...
When the conditions for scheduled cleaning are not met, or the dependencies change , it will not be executed by default: Dependency changes: such as map invalidation, map change, area/partition change, etc., do not perform cleaning tasks, The reservation conditions are not met: if the water tank is empty, the scheduled cleaning will not be performed; if the battery is...
The robot itself has a radar protection function. When the radar is damaged or blocked, the robot will alarm and stop working, and the danger needs to be removed manually. Note: When the voice broadcast of radar-related abnormalities, please check whether the radar mask is stuck by foreign objects, whether the radar is blocked, and move to a new position...
The robot is equipped with a cliff detection sensor, which can prevent the robot from being injured and damaged by falling from stairs and steps higher than 8cm when cleaning. When the cliff sensor fails or is obscured by dirt, the robot will alarm and stop working.
When the robot cleans the entire image, the single cleaning area is less than 4 square meters (the actual cleaning area of the robot), or the cleaning time is less than 10 minutes, the area will be automatically recognized as a key cleaning area, and the “well” cleaning will be performed, that is, two The 90-degree bows are clean .
The robot has two kinds of air-drying functions, namely, the robot air-drying and the charging base air-drying. Robot air-drying function: After the roller brush self-cleaning in the scrubbing mode , the robot automatically performs the roller brush air-drying task for 8 hours (using the internal waterproof fan), and the air-drying stops when the time is up. Note: After the roller...
In the scrubbing mode, the brush rotation speed of the robot is 800rpm, 1200rpm and 1600rpm in the light dirt, standard and heavy dirt gears respectively. In the dry sweeping mode , the brush rotation speed of the robot is 500rpm, 800rpm and 1200rpm in each gear of light dirt, standard and heavy dirt respectively.
