Smartmi VortexWave Robot can achieve good cleaning effect without using detergent, if you need to use detergent, it is recommended to use neutral low foam detergent, acid and alkaline detergent will corrode and damage the water tank and internal pipeline. It is forbidden to add liquid containing essential oil into the water tank, and the ratio of water is not...
Clean the sewage tank in time after each cleaning, and also clean the filter sponge and dry cleaning Hypa at the same time. The roller brush should be cleaned manually at least monthly. , If there is hair entanglement, it should be cleaned up immediately, and the position of the suction port of the roller brush should also be cleaned...
In order to facilitate the user's remote control, the robot will enter a silent charging state when the power button is pressed on the charging stand and will not be turned off; when the robot is turned off and placed in the charging stand, the robot will automatically turn on.
If the water tank is not installed properly, there will be water leakage. When installing the water tank, press down with your hand and hear a "click" sound, and the water tank is installed in place. In addition, after adding water to the water tank, you need to use a dry cloth to clean the outside of the water tank...
When the robot crosses the threshold, the raised threshold will scratch the robot brush and cause a small amount of garbage to fall. In addition, the gap caused by the lifting of the front of the robot over the sill will cause the area of the suction port to become larger, which will affect the suction effect of the suction...
There will be some water stains in the scrubbing mode . The water volume of the third gear will be different. The precise water output is 0.2g per second . The light stain gear has almost no water stains, and the standard gear will have a little water. There will be more, there will be some water stains, you can...
mode of the smartmi scrubbing robot , the maximum power consumption is about 0.084 kWh from the start of self-cleaning to the end of air-drying when it returns to the charging base (this process includes the power consumption of charging, because air- drying is related to the environment, this power consumption is only For reference), if the power consumption does...
The Zhimi floor scrubbing robot uses LDS laser navigation combined with collision avoidance. LDS laser navigation can achieve 360-degree scanning, obtain environmental information in real time, and scan the home terrain more quickly, accurately, and comprehensively, restore the full picture of the home, and clean it intelligently. more convenient .
