Skip to content

Product Help

Air Purifier

Air Purifier P1

Evaporative Humidifier

Evaporative Humidifier 2

Standing Fan 2s

Standing Fan 3

Fan Heater

Convector Heater 1s

Smartmi VortexWave A1

The robot has a built-in high-performance rechargeable lithium- ion battery pack. To maintain battery performance, please keep it charged every day. If you do not use it for a long time, please turn it off and store it, and charge it at least once every three months to avoid damage to the battery due to overdischarge.

During the cleaning process , if you need to clean the water tank or add fresh water. Please short press the power button, the robot enters the pause state, open the face cover, and take out the water tank. After cleaning or adding water, put it back , close the cover, and short press the power button to continue the cleaning task .

The battery is less than 15 % during cleaning, or after cleaning , when the clean water tank is empty (the robot suspends the cleaning task and alarms the user to add water, and waits in place for 90s, if the user does not move after 90s, the robot automatically returns to charging base or starting position), when the sewage tank is full (the robot suspends the cleaning task and alerts the user to clean the sewage tank, waits in place for 90s, if the user does not move after 90s, the robot automatically returns to the charging base or starting position), When the robot cannot reach the designated area for cleaning, it will automatically enter the recharging state. The robot will automatically return to the charging base for self-cleaning and charging. In pause or standby state, short press the recharge button, the robot returns to the charging base to self-clean and charge. In pause or standby state, long press the recharge button, the robot returns to the charging base to charge without self-cleaning. Short press any button during the recharging process will suspend the recharging task . When the robot is on the charging base, short press the recharge button to start/cancel the self-cleaning task.

The robot will enter the sleep state if it is still (not charging) and has no operation for more than 10 minutes; in the sleep state, short press any button to wake up the machine. The robot will automatically shut down (no beep) when it sleeps for more than 30 minutes without any task . In addition, it will automatically shut down when the power is lower than 5%.

The dry sweeping and scrubbing modes can only be switched by installing different upper covers of the water tank. The APP side cannot switch between dry sweeping and floor scrubbing.

The robot continuously sprays the water in the clean water tank to the cleaning roller, and the cleaning roller rotates at high speed to scrub the ground, and cooperates with the suction effect of the large suction fan to recycle the cleaned mixed garbage and sewage into the sewage tank. The advantage of live water scrubbing is that it does not depend on the base station. The robot can keep the water clean every time the ground is scrubbed in real time, and can recycle sewage and garbage in time, ensuring that the roller brushes self-cleaning at all times , meeting the needs of deep cleaning for families.

Smartmi VortexWave Robot Vacuum Cleaner, as a real floor scrubbing robot, realizes washing, mopping, sweeping, suction, four-in-one , recycling of clean water for washing the floor, cleaning the floor with running water, real-time self-cleaning of the roller brush, and super suction of 4000Pa; Continuous water spray + high speed + high suction, dry and wet garbage synchronous processing; dry sweeping + floor scrubbing two cleaning modes, the integrated design of the sewage tank, adding water and cleaning synchronously; the robot has a 600ml clean water tank and a 360ml sewage tank, The ground is cleaned deeply and efficiently, the clean water is used to recycle the sewage, the sweeping , mopping, suction and washing are integrated, and there is no need to return to the base station. Glossy floor, plastic floor and stubborn stains that are difficult to clean; pure soft brush, fine soft brush, suitable for high-gloss floors, wooden floors and daily cleaning and maintenance; LDS lidar 8m ranging, equipped with precise navigation system And SLAM algorithm, while cleaning and mapping, easy to deal with complex environments, intelligent path planning, real-time route display; low-noise air-drying by rolling brush, and air-drying by robot:

No need to take out the roller brush, it automatically starts to air dry the roller brush after self-cleaning, multiple noise reduction, the roller brush is fluffy and dry without peculiar smell; air-drying on the charging base: the intelligent roller brush is detected in place, and it starts to air dry when it is put in, preventing moisture and mildew; 4000Pa hurricane suction Wet and dry dual-purpose high-performance waterproof fan, combined with long-haired roller brush, deeply cleans the floor stains; 5200mAh large-capacity battery, no anxiety about battery life, taking into account suction and battery life, providing strong power for cleaning; no need to worry about the whole cleaning process, low-power automatic recharging , After the battery is fully charged, it will automatically continue to scan at breakpoints to prevent missed scans.

#{area}

#{region}
#{language}