Skip to content

Smartmi VortexWave A1

How to choose the washing detergent for the Smartmi VortexWave Robot?

Smartmi VortexWave Robot can achieve good cleaning effect without using detergent, if you need to use detergent, it is recommended to use neutral low foam detergent, acid and alkaline detergent will corrode and damage the water tank and internal pipeline. It is forbidden to add liquid containing essential oil into the water tank, and the ratio of water is not...

What daily maintenance do you need to do?

Clean the sewage tank in time after each cleaning, and also clean the filter sponge and dry cleaning Hypa at the same time. The roller brush should be cleaned manually at least monthly. , If there is hair entanglement, it should be cleaned up immediately, and the position of the suction port of the roller brush should also be cleaned...

Why can't the robot be turned off when the robot is recharging?

In order to facilitate the user's remote control, the robot will enter a silent charging state when the power button is pressed on the charging stand and will not be turned off; when the robot is turned off and placed in the charging stand, the robot will automatically turn on.

Why does the Smartmi VortexWave Robot Vacuum Cleaner leak water?

If the water tank is not installed properly, there will be water leakage. When installing the water tank, press down with your hand and hear a "click" sound, and the water tank is installed in place. In addition, after adding water to the water tank, you need to use a dry cloth to clean the outside of the water tank...

Why is there a small amount of garbage left on the threshold after the robot crosses it?

When the robot crosses the threshold, the raised threshold will scratch the robot brush and cause a small amount of garbage to fall. In addition, the gap caused by the lifting of the front of the robot over the sill will cause the area of the suction port to become larger, which will affect the suction effect of the suction...

Does this mopping mode have water stains?

There will be some water stains in the scrubbing mode . The water volume of the third gear will be different. The precise water output is 0.2g per second . The light stain gear has almost no water stains, and the standard gear will have a little water. There will be more, there will be some water stains, you can...

What type of motor does the fan use?

Brushless motor.

What is the material of the product shell?

 ABS material.

Go back to the base station for deep self-cleaning mode, from the beginning to the end of 8 hours of air-drying, how much power is consumed?

mode of the smartmi scrubbing robot , the maximum power consumption is about 0.084 kWh from the start of self-cleaning to the end of air-drying when it returns to the charging base (this process includes the power consumption of charging, because air- drying is related to the environment, this power consumption is only For reference), if the power consumption does...

Can the socket be used with 110v ?

Yes, the adapter of the Smartmi floor scrubber supports a power supply range of 100V~240V.

Can pet feces be automatically identified and avoided?

It cannot be automatically identified and avoided, and pet feces need to be cleaned up in time.

What is the principle of Zhimi floor scrubber robot navigation and obstacle avoidance?

The Zhimi floor scrubbing robot uses LDS laser navigation combined with collision avoidance. LDS laser navigation can achieve 360-degree scanning, obtain environmental information in real time, and scan the home terrain more quickly, accurately, and comprehensively, restore the full picture of the home, and clean it intelligently. more convenient .

What angle can the robot climb?

15 degrees.

What is the height of the robot over obstacles?

12mm.

What is the length of the power cord?

1.5m.

What is the material of the roller brush ?

 The soft fur is 100% polyester, and the hard fur is nylon .